11
From the toolbar, select
“Threshold Set”, and right click the Threshold to
type or modify the threshold value.
Calibration
Choose
“Calibration” tab, the user can perform user self-calibration
operation also can choose
“Factory Reset” mode. For example, the
current optical power at 1310nm is -10dBm, type -10dBm in the text box
of input standard power, and click Calibration tab, then finished the
calibration operation at 1310nm wavelength.
Power ON/OFF
1.Power ON
Press
for about two seconds to make the unit power on
，
Enter
into the PON power meter function , the unit displays as shown in below
figure:
