Joie fluri, Инструкция по эксплуатации

Страница: 10 / 29

17 18
STROLLER OPERA
TION
Adjust Calf Support
!
Use the calf support when being in flat position.
There are two angles﹐ 1-2 (Fig. 16) for adjustment.
To raise calf support﹐ push the calf support from position 1 to
position 2. (Fig. 16)
To lower calf support﹐ press the adjustment buttons on both
sides of the calf support (Fig. 17.1) ﹐ and rotate the calf support
downwards. (Fig. 17.2)
Use Canopy
To open the canopy﹐ pull canopy toward front. (Fig. 18)
To fold the canopy﹐ pull canopy toward back. (Fig. 18)
Roll up the canopy rear panel﹐ and through the webbing out the
fabric loop﹐ then snap-fit the snaps on the webbing. (Fig. 18.1)
! It is convenient to see the baby when rolling up the canopy
rear panel. (Fig. 18.1)
Use Front Swivel Lock
Pull up the front swivel locks to maintain the moving direction.
(Fig. 19)
Tip
It is recommended to use swivel lock on uneven
surfaces .
STROLLER OPERA
TION
Use Brake
To lock wheels﹐ step on the brake lever as Fig. 20 ﹐ the stroller is
braked on the condition that both of the brakes are stepped.
Lift the brake lever to release wheel. (Fig. 20.1)
Tip
Always apply brake when stroller is in stopped
position.
Fold Stroller
Please fold the canopy before folding the stroller.
Push secondary lock
(Fig. 21.1) and squeeze one-hand-fold
handle. (Fig. 21.2) Push the stroller forward to fold.
A click sound means the stroller is folded completely. (Fig. 22)
Use Accessory
Fig. 23.1 Shoulder Harness Cover
Fig. 23.2 Armbar Cover
Fig. 23.3 Mosquito Net
Fig. 23.4 Infant Insert
Fig. 24.5 Rain Cover
Not all accessories are included on some models.
Use Shoulder Harness Cover
The shoulder harness cover can be removed from the webbing
after pulling the elastic. (Fig. 24) To assemble shoulder harness
cover in reverse steps.
Use Armbar Cover
The armbar cover can be removed from the armbar. To
assemble armbar cover in reverse steps.