background image

When you are breathing heavily during a workout.

When your hands are constricted by wearing a ring.

When your hands are dry or cold. Try to moisten your palms by rubbing them
together to warm.

Anyone with heavy arrhythmia.

Anyone with arteriosclerosis or peripheral circulation disorder.

Anyone whose skin on the measuring palm is especially thick.

3.3 MAINTENANCE

 

What kind of routine maintenance is required?

 

Minimal maintenance and cleaning is required.

 

Adhering to this schedule will extend 

the life of your machine. 

How do I clean my bike?

 

Clean with soap and water cleaners only. Never use solvents on the plastic parts. 

Cleanliness of your e

q

uipment and its operating environment  will keep maintenance 

problems and service calls to a minimum. For this reason, it  is recommend that the 
following preventive maintenance schedule be followed. 

1) 

Clean the equipment:

 

(

D

aily)

Turn off the equipment by unplugging the power cord from the wall outlet.

Wipe down the equipment with a damp cloth. Never use solvents, as they can

 

cause damage to the equipment.

Inspect the power cord. If the power cord is damaged, reference contact

 

information on the back cover of the INFORMATION CARD for a 

replacement.

Make sure the power cord is not underneath the equipment or in any other

 

area where it can become pinched or cut during storage or use.

2) 

Clean underneath the equipment:

 

(

W

eekly)

Turn off the equipment by unplugging the power cord from the wall outlet.

Move the equipment to a remote location.

Wipe or vacuum any dust particles or other objects that may have

 

accumulated underneath the equipment.

Return the equipment to its previous position.

3) 

MONTHLY

Inspect and tighten all assembly bolts and pedals on the machine

Clean any debris off of the pedal arms and link arms.

4) 

BI-MONTHLY

Lubricate the link arm joint with Silicone lubricant (included). Apply 1-2 drops

 

on left and right side of link arm joints.

Содержание HT5.0
















Отзывы: