JohnsonDiversey TASKI ergodisc 165, Инструкция по эксплуатации

Страница: 5 / 36

21
I2
5
I2
4
I2
3
I2
2
I2
1
I2
0
I1
9
I1
8
I1
7
tr
sl
se
p
t
n
o
n
l
it
h
u
h
r
fr
fi
es
en
el
d
e
d
a
Transport over stairs
End of operation
Emptying solution
The disposal of solution must be carried out in accordance with the national
regulations.
Emptying procedures for the Foam Generator are explained in their own
instructions of use.
Cleaning the tool
Cleaning the pad
Cleaning the machine
Storing the machine
Service, maintenance and care
The correct maintenance of the machine is a precondition for error-free
operation and a long service life.
Service intervals
TASKI machines are high quality machines that have been checked for safety
at the factory by authorised inspectors. Electrical and mechanical components
are subject to wear and/or ageing after longer periods of use.
We recommend the transporting of the machine up or down steps
to be performed by two people.
• Release the operation levers.
• Disconnect the power supply cord from the mains socket.
• Turn the tool away from the coupler.
Caution:
Due to the weight of the machine, there are risks involved in such
transportation!
Slipping can result in damage to the machine and injuries to
persons.
• When lifting, one person should hold the
machine at the brush cover, and the second
person at the machine handle.
• Release the operation levers.
• Pull the power supply cord out of the mains socket.
• Tilt the machine back slightly.
• Turn the tool away from the coupler.
• Carefully lower the machine onto the tool unit.
• Pull the height adjustment lever and slowly lift
the guide pillar until it is in the upright position.
• Let go of the height adjustment lever, the guide
pillar will locate into place and stay at that angle.
• Clean the power supply cord with a damp cloth
and wrap it around the machine handle and the
cord hook.
• Remove the water tank from the machine and empty it.
• Empty the solution from the spray unit.
• Clean the tool under running water with a brush.
• Rinse out the spray unit thoroughly with warm water.
If the cleaning solution dries up, it could cause blockages.
• Lay the pad into cleaning solution for a few hours and then rinse it off.
The pads may be put into the washing machine and washed at a max. of
40°C.
• Air dry the pads.
Caution:
Do not tumble dry the pads!
Caution:
Never clean the machine with high water pressure or a water
hose.
The ingress of water into the machine might cause considerable
damage to mechanical or electrical parts.
• Wipe down the machine with a damp cloth.
Caution:
Never store the machine with a mounted tool!
The tool may get damaged and become unusable.
Caution:
Always unplug the mains plug from the main socket when carrying
out any maintenance work!
Caution:
Only TASKI branded spare parts must be used, otherwise
warranties and liabilities will be omitted!
Symbols:
◊
= after use,
◊◊
= every week,
◊◊◊
= every month
Activity
◊ ◊◊ ◊◊◊
page
Check the motor ventilation for the collection of
dust and clean when necessary
19
Empty spray unit and clean with warm water 21
Clean the brushes 21
Clean the pads and let them dry 21
Clean the machine with a damp cloth 21
• In order to maintain operational reliability and availability for use, the service
must be carried out after 250 working hours or at least once a year.
Shorter intervals are necessary in case of rough environments or special
conditions of use and/or inadequate maintenance.
All manuals and user guides at all-guides.com