11
ATTENTION:
If the need should arise to take or send the appliance to an authorised service centre,
make sure to clean all its parts thoroughly.
For hygienic purposes, the service centre shall reject appliances that are not perfectly
clean on the outside or inside without making any controls or repairs.
The symbol on the product or on its packaging indicates that this product may
not be treated as household waste. Instead it shall be handed over to the applicable
collection point for the recycling of electrical and electronic equipment.
By ensuring this product is disposed of correctly, you will help prevent potential ne-
gative consequences for the environment and human health, which could otherwise
be caused by inappropriate waste handling of this product.
For more detailed information about recycling of this product, please contact your
local city office, your household waste disposal service or the shop where you pur-
chased the product.
Description
A. Removable measuring cup
B. Safety lid against accidental pouring
C. Flavour adding hole and container
D. Graduateg jug in plastic
E. Motor housing
F. 2 speed selector and impuls
G. Safety device against accidental start
H. Cable winding
HOW TO USE
This appliance is equipped with a safety
system.
If the jug is not correctly in place, the ap-
pliance will not work.
1. For blending place the jug (D) into the
motor housing (E) with a direction the jug
fit the positioning, then slighlly twist it
counter clockwise until it is locked (fig. 1).
2. Slice the food to be blended and then
add the liquid to a desired level but never
exced the maximum level marked.
3. Put the lid (B) on and lock by turning it
(fig. 2).
4. Plug the appliance into power outlet and
set the operating switch (F) to desired
speed (1,2 or Pulse) (fig. 3).
5. During blending flavour can be added
in through the flavouring adding hole and
container (C) (fig. 4).
6. When blending finished, turn the
switch (F) to “0” for stop and then remove
the jug (D) by turn it clockwise (fig. 5).
Caution
:
Do not remove the jug before the ap-
pliance has completely stopped.
The appliance can only be used when the
jug is filled properly 7.
To clean, follow the instruction of “Main-
tenance” as below shown.
Caution:
The Appliance can only be used in a way
run 1’ and then rest 3’ before next run.
MAINTENANCE
To clean please carry out according to the
following guideline:
• To clean, put lukewarm water in the jug.
• Turn selector switch (F) and run a few
seconds.
• Remove the jug and rinse under the run-
ning water.
• Clean the motor housing with a damp
cloth.
Never put the appliance in the water.
BlenderISTRUZIONI10-11.Qxd_Layout 1 15/07/14 12:20 Pagina 11
Содержание Maxi-blender
Страница 16: ...16 BlenderISTRUZIONI10 11 Qxd_Layout 1 15 07 14 12 20 Pagina 16 ...
Страница 17: ...17 BlenderISTRUZIONI10 11 Qxd_Layout 1 15 07 14 12 20 Pagina 17 ...
Страница 18: ...18 BlenderISTRUZIONI10 11 Qxd_Layout 1 15 07 14 12 20 Pagina 18 ...
Страница 19: ...19 BlenderISTRUZIONI10 11 Qxd_Layout 1 15 07 14 12 20 Pagina 19 ...