Johnson Horizon Fitness T202, Руководство по обслуживанию

Страница: 7 / 37

CHAPTER 2: Preventative Maintenance
Failure to do so may result in premature failure of key electrical components.
• Vacuum and wipe down the belt with a damp cloth. Vacuum any black / white particles that may
accumulate around the unit. These particles may accumulate from normal treadmill use.
2.1 PREVENTATIVE MAINTENANCE-CONTINUED
EVERY 6 MONTHS OR 150 MILES
It is necessary to lubricate your treadmill running deck every
six months or 150 miles (240 kilometers) to maintain optimal
performance. Once the treadmill reaches 150 miles (240
kilometers), the console will display the message
“LUBE” or
“LUBE BELT” . The treadmill will not operate while the
message is showing. Hold „STOP‟ for 5 seconds to
suspend message for 5 miles.
Your treadmill came with a bottle of lubricant which
can be used for two applications.
● Turn off the treadmill with the on/off switch, then unplug
the power cord at the wall outlet.
● Loosen both the rear roller bolts. (for best results, place two
removable marks on both sides of the frame and note roller
position). Once the belt is loosened, take the bottle of lubricant and apply it to the entire top surface of the
running deck. Tighten both rear roller bolts (matching up the marks for proper position) to original position.
After you have applied lubricant, plug in the power cord, insert the safety key, start the treadmill and walk
on the belt for two minutes to spread the lubricant.
● Lubricate the air shocks with Teflon based spray.
● Once lubrication is complete, hold “elevation ▲ & Stop” both keys 5 seconds then the message will be
clean.
7