background image

 

Rogue River Aquatoy 

 

 

Rogue Rive Aquatoy 

ASL

 

 17 

becomes fouled with weeds or fishing line, or strikes an 
object, the amp draw from the battery will “trip” (pop 
out) and interrupt the flow of electricity to the motor 
and circuitry.  If the circuit breaker “trips” and is telling 
you there is an electrical overload, turn the motor to 
“off.”  Pedal the boat to shore and raise the motor.  
Examine the prop carefully and remove anything that 
would impede the prop.  Often fishing line gets 
wrapped around the shaft and it’s not always visible. 
Once the prop is clear, lower the motor and push in the 
circuit breaker to reset it.  If it trips again, don’t use the 
motor.  Refer to the trouble-shooting guide in this 
manual or call your  Johnson Outdoors-Watercraft, 
Sport & Leisure Group dealer.  

 

 Electric Motor Prop 

When operating the boat at the #5 speed setting with 
only one person, some prop noise may be experienced.  
This noise is created by minor ventilation of the prop 
and will not have a significant detrimental affect on 
performance nor will it harm the motor.  
 
Boat speed can be further enhanced by pedaling the 
boat in conjunction with the motor.  
 

CAUTION:  Do not use the electric motor when 
contact with swimmers or bystanders could occur.  
Severe injury could result from contact with the 
spinning prop.  Children operating the boat should 
be closely supervised by an adult.  

Содержание ELECTRIC GLIDE ESCAPE JAZZ















Отзывы: