Johnson Outdoors ELECTRIC GLIDE ESCAPE JAZZ Скачать руководство пользователя страница 7

 20 

leaking will occur between the hull and the deck.  
Some leakage will occur during heavy or continuous 
rain.  THIS IS NOT A DEFECT!  Remove the bow 
drain plug located at the bow under the rub-rail and 
stand the boat on its bow end to drain the water.  
 

No damage will result from water accumulation, but the 
boat should be periodically drained (once a month).  
If excess water is left in the boat,  the hull shape could 
alter.  If excess water freezes, hull/deck shape could alter 
as well. Remember, you don’t leave your car windows 
down during a rain.  Don’t leave your pedal boat right 
side up for prolonged periods without a cover.  If you do, 
you will have to drain the interior prior to use.   
 
Running a cable or chain over the paddle wheel and 
looping it around a stationary object can secure the boat 
and locking the two cables ends together.  

Make sure the 

electric motor is in the “UP” position to prevent water 
from seeping down the motor mounting shaft and into 
the motor. 

 

Long Term Storage 

Storage of your Escape or AquaToy in the off-season or 
long periods of time requires a little extra care.  If it is to 
be stored outside, stand the boat on its bow or side and 
lean it against a building, hull side out to prevent water, 
snow, leaves etc. from accumulating in the unit. 

Do not stand the boat on its stern as this could 
damage the rudderpost and rudder.  

Secure the boat so 

it cannot fall.  Install the storage cover if you have one.  If 
you have room to store it inside, the boat can be set flat 
on the floor or stood on its bow and leaned against the 
wall.  
 

 

Escape Calypso

 

      

WaterWheeler  MKV

/WaterWheeler

  5

 

Содержание ELECTRIC GLIDE ESCAPE JAZZ















Отзывы: