ZFR1811 Wireless Field Bus Router Installation Instructions
2
North American Emissions Compliance
United States
Canada
Installation
Follow these guidelines when installing a
ZFR1811 Router:
•
Transport the ZFR1811 Router in the original
container to minimize vibration and shock damage.
•
Verify that one 1/2 in.
trade size Electrical
Mechanical Tubing (EMT) connector is shipped
with the ZFR1811 Router.
•
Do not drop the ZFR1811 Router or subject it to
physical shock.
Dimensions
See Figure 1 for physical features and dimensions of
the ZFR1811 Router.
Compliance Statement (Part 15.19)
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1.
This device may not cause harmful interference,
and
2.
This device must accept any interference
received, including interference that may cause
undesired operation.
Warning (Part 15.21)
Changes or modifications not expressly approved by
the party responsible for compliance could void the
user’s authority to operate the equipment.
Industry Canada Statement
The term
IC
before the certification/registration
number only signifies that the Industry Canada
technical specifications were met.
Le terme « IC » précédant le numéro d'accréditation/
inscription signifie simplement que le produit est
conforme aux spécifications techniques d'Industry
Canada.
IMPORTANT:
Before installing the ZFR1811
Router in plenum applications, verify acceptance of
exposed plastic materials in plenum areas with the
local building authority. Building codes for plenum
requirements vary by location.
Some local building authorities accept compliance to
UL 1995, Heating and Cooling Equipment, whereas
others use different acceptance criteria.
Figure 1: ZFR1811 Wireless Field Bus Router,
Physical Features and Dimensions, mm (in.)
