Johnson Controls tyco Illustra Pro, Быстрый старт

Страница: 1 / 3

Figure 3: Camera interface (Base assembly side)
Figure 3
Security
Quick Start Guide
(8200-2007-07_C0)
Illustra Pro Gen4, 2MP, 4MP & 8MP Indoor / Outdoor IR Dome cameras
Note: Please visit illustracameras.com for access to firmware updates that include
new features, cyber-security enhancements and bug fixes.
In the box

1 x Camera

1 x T20 Security Key

4 x TP4 32mm screws & 4 x Plastic screw anchors

1 x Water proof rubber (1 hole)

1 x Water proof rubber (3 holes)

1 x Water proof rubber insert tool

1 x Printed Regulatory Document

1 x Printed QSG

1 x Camera bottom base (use in a wall mount installation)

1 x Camera bottom base cable hole cover

1 x Mounting template (use with the bottom case / wall mount installation)

1 x Mounting template (use in an in-ceiling mount installation)

1 x Metal cover
Installation tools

1 x Screw driver

1 x Drill

1 x Wire cutters
Figure 1: PG4 Indoor / Outdoor IR Dome camera parts
Figure 1
Table 1: Camera parts descriptions
Number Description
1 Camera bottom base
2 Dome cover base
3 Dome
Quick reference

Default IP: 192.168.1.168 (DHCP enabled)

Default Username / Password: admin / admin

Power: PoE Class 3 or 24V AC
Table 2: Camera interface (Bubble assembly side)
Number Description
1 USB port connection
2 Reboot button
3 Auto focus (Set the camera focus during installation)
4
Reset to Factory default but preserve IP Address (Hold for 5
seconds)
Reset to factory default (Hold for 20 seconds)
Figure 2: Camera interface (Bubble assembly side)
Note: Use the T20 security key to remove the three screws on the dome cover (2)
(Figure 1) to access the interior buttons and USB connection.
Figure 2
Table 3: Camera interface (Base assembly side)
Number Description
1 Ethernet port
2 Micro HDMI cable port
3 Mini USB cable port
4 Micro SD card slot
5 Audio and alarm pins
6 Power connector
Mounting the camera
Refer to the Illustra mounting accessories webpage
https://www.illustracameras.com/products/accessories/mounts for
assistance. The following mount accessory part numbers are
applicable with the Illustra Pro Gen4 2MP, 4MP and 8MP IR Indoor /
Outdoor Dome cameras: ADCi6DPCAPOW, ADLOMARM,
ADCDMCRNRO, ADCDMPOLE and IBJB-P-ISWB-0.