Illustra Body Worn Camera Kiosk ApplicationConfiguration Guide
8200-2077-02 A0
16
6
Select
Basic Settings
in the menu list.
7
Under the
Video
heading:
a
Select the
Resolution
drop-down list and select an option.
b
Select the
Maximum FPS
drop-down list and select an option.
c
Select the
Aspect ratio
drop-down list and select an option.
8
Under the
WiFi
heading:
a
Select the
Enable WiFi
slide button to enable or diable WiFi.
b
Select the
SSID
text box and enter the name of the WiFi network.
c
Select the
Password
text box and enter the WiFi network password.
9
Under the
Server
heading:
a
Select the
Server address
text box and enter the server IP address.
b
Select the
Allow secure connections
slide button to enable or diable a secure con-
nection.
c
Select the
Use device name as encoder name
slide button to enable or diable a
device name.
Note:
This enables the camera to connect to the Illustra Mobile Video Manager
server for live streaming.
10
Under the
APN
heading:
a
Select the
Apply custom APN settings
slide button to enable or diable APN settings.
b
Select the
APN
text box and enter the name of the APN.
c
Select the
Name
text box and enter the name of the APN.
d
Select the
Username
text box and enter APN username.
e
Select the
Password
text box and enter APN password.
Note:
APN (Access Point Network) enables the camera to work with a sim card.
11
Select
Advanced
in the menu list.
12
Under the
Recording
heading:
a
Select the
Enable recording on start-up
slide button to enable recording when the
camera is removed from the camera docking station.
b
Select the
Record while streaming
slide button to enable or diable recording when
streaming through the Illustra Mobile Video Manager to victor.
c
Select the
Recording mode
drop-down list and select one of the following options:
Stop when disk is full:
Recording stops when the SD card is full.
Overwrite oldest:
Recording continues and the oldest recording deletes.
d
Select the
Disk alarm threshold
drop-down list and select an option.
For example, when you select 75 in the drop-down list then an alarm goes off on the camera
when the camera storage is 75% full.
e
Select the
Enable audio for pre-recording
slide button to enable or diable audio pre
recording.
