Johnson Controls TL-BRTRP-0, Руководство по установке, Страница: 4 / 10

IP address, gateway address, and netmask. After you use the reset switch, you need to reboot the
router.
Rebooting the router
To reboot the router, unplug and then plug the USB cable on the router.
Table3: Default address values
Address type Default address
IP Address 192.168.92.68
Gateway Address 192.168.92.1
Subnet Mask 255.255.255.0 (/24)
Operation
Light-Emitting Diodes (LEDs)
The router contains the following LEDs:
Table4: LEDs
Name Description
USB PWR The power LED glows when sufficient power is provided from the USB
host.
ETH An Ethernet LED glows green for 100 Mbps and yellow for 10 Mbps (also
indicates activities by flashing).
MS/TP A green LED flashes when the router receives MS/TP traffic.
Webpage consideration
The BACnet/IP to MS/TP Router contains a web server that can be accessed from any Internet-
compatible computer on the local network (Microsoft
®
Internet Explorer
®
Version 5.0 or later). To
access the MS/TP network, you need the router, a computer used to configure the router, and a
connection to the MS/TP network.
Figure 3: Setup for initial IP address configuration
Portable BACnet/IP to MS/TP Router Installation Instructions 4