Johnson Controls SABROE ComPAC, Руководство по эксплуатации

Страница: 16 / 60

Operating manual - ComPAC
16/56 011769 en 2020.03
Safety
The compressor name plate is positioned on the compressor and contains this information:
Compressor no. Identification no. (serial no).
Year
Year of manufacturing.
Type Manufacturer's type designation.
Refrigerant
Allowable refrigerant or refrigerants for the compressor.
(The actual refrigerant for the unit is stated on the unit name
plate).
Speed
Specific rotational speed. Specific rotational speed is used for cal-
culating swept volume. For the actual allowed operating speed,
please refer to the operating limits and Matchmaster's calculation
on the actual operating condition.
Swept volume Swept volume of the compressor at nominal speed.
Pressure system
The low-pressure side of the compressor is referred to as the LP
side.
The high-pressure side of the compressor is referred to as the HP
side.
Allowable pressure, max.
The max. pressure (pressure relative to atmospheric pressure)
that the compressor has been designed for in terms of pressure
strength design.
The maximum practical operation pressure is lower than the maxi-
mum allowable pressure, depending on the operating conditions
and safety equipment settings.
Test pressure The test pressure the compressor has been strength tested with.
CE and Ex
The CE and Ex marks indicate that the compressor has been de-
signed in accordance with the EC ATEX directive.
EAC
The EurAsian Conformity mark (EAC) indicates that the compres-
sor is in compliance with all relevant technical regulations of the
Eurasian Customs Union.