Johnson Controls Penn System 450 Series, Технический бюллетень

Страница: 44 / 84

System 450™ Series Modular Control Systems with Standard Control Modules Technical Bulletin 44
To access and navigate the System 450 Setup Start screens:
1. In the Main (Sensor Status) screen, press and simultaneously and hold
for 5 seconds. The Sensor Setup Start ( SENS ) screen appears (Figure 18).
2. Press (repeatedly) to scroll through and access the Output Setup Start
(OUTX
x
) screens for all of the outputs in your control system.
Note: All Setup Start screens have four blinking dashes in the setup value
fields. You cannot select values for the fields in the Setup Start screens.
3. Depending on the Setup Start screen that you have navigated to, press :
• in the Sensor Setup Start (SENS) screen to go the Select Sensor 1 Type
( Sn-1 ) screen and set up the sensors in your control system. (See Setting
Up the Sensors and Transducers for procedures on setting up the
hard-wired sensors and transducers.)
Figure 18: Accessing the Setup Start Screens in the System 450 UI
Sensor Setup
Start
SENS
Relay Output
Setup Start
OUTR 1
Output Relay 1
OUTA 3
Output Analog
Setup Start
Analog Output 3
232
PSI
Sensor Status
Displayed
Main Screens
Relay Output
Setup Start
OUTR
2
Output Relay 2
Press and hold
+ for 5 seconds
to access the
Setup Start screens.
Press to scroll through the Sensor Setup Start screens
and all of the Analog and Relay Output Setup Start screens.
Press in the Sensor Setup Start screen to scroll through
the Sensor Setup screens.
Press in any Output Setup Start screen to scroll through
that output's set up screens.
Press + simultaneously in any Setup Start screen to
return to the Main Screen.
M
M
M
M
Up to 10 outputs
can be connected,
set up, and viewed.
M
Sensor Setup Screens
Output 1 Relay Setup Screens
Output 2 Relay Setup Screens
Output 3 Analog Setup Screens
F
ig:
sys
4
50
U
I_s
y
s_s
tu
p
- - -
- - -
- - -
- - -
1
M