FEU16x0 Field Equipment Controller Installation Instructions
1
Applications
The FEU16x0 Controller
is a member of the
Metasys
® system Field Equipment Controller (FEC) family. The
controller is designed exclusively for use in a
Metasys
Release 8.1 smoke control application that is UL 864 UUKL/
UUKLC 10th Edition Smoke Control Listed. For
Metasys
system smoke control applications, you must refer to the
Metasys® System UL 864 10th Edition UUKL/ORD-C100-13 UUKLC Smoke Control System (LIT-12012487)
for
detailed requirements and procedures for installing, commissioning, and operating UL 864 UUKL/UUKLC Listed
Metasys
system devices. For example, the MS-FEU1610-0U can only be used with the Firefighters Smoke Control
Station (FSCS) panel manufactured by Automation Displays, Inc. (ADI). The UL 864 UUKL/UUKLC listing for
Smoke Control Equipment is voided if (1) you do not use the required software tools at the required versions; or (2)
you do not meet the requirements or do not follow the procedures as documented in the
Metasys® System UL 864
10th Edition UUKL/ORD-C100-13 UUKLC Smoke Control System Technical Bulletin (LIT-12012487)
.
North American Emissions Compliance
Canada
United States
Installation
Observe these guidelines when installing the FEU controller:
•
Transport the controller in the original container to minimize vibration and shock damage to the controller.
•
Verify that all parts shipped with the controller.
•
Do not drop the controller or subject it to physical shock.
Parts Included
•
one MS-FEU1610-0U Controller with removable Terminal Plugs
•
one Installation Instructions sheet
Materials and Special Tools Needed
•
three fasteners appropriate for the mounting surface (#8 screws or M4 screws)
This Class (A) digital apparatus meets all the requirements of the Canadian Interference-Causing Equipment
Regulations.
Cet appareil numérique de la Classe (A) respecte toutes les exigences du Règlement sur le matériel brouilleur
du Canada.
This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when this equipment is operated in a commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference, in which case the user will be required to correct the interference at his/her
own expense.
FEU16x0 Field Equipment Controller
Installation Instructions
MS-FEU1610-0U
Part No. 24-10143-535, Rev. B
Release 8.1
Issued March 2018
