Johnson Controls M9203-AG-2 Series Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 11

Johnson Controls M9203-AG-2 Series Скачать руководство пользователя страница 3

M9203-AGx-2(Z) Series On/Off and Floating Point Electric Spring Return Actuators Installation Guide

3

Accessories

Mounting

The M9203-AGx-2(Z) Series On/Off and Floating Point
Electric Spring Return Actuators can be easily installed
on dampers with round shafts from 1/4 to 1/2 in.
(6 to 12 mm) or square shafts from 1/4 to 5/16 in.
(6 to 8 mm) using the standard shaft coupler included
with the actuator. If the damper shaft extends less than
3.31 in. (84 mm), see the Removable Coupler section
for further instructions. If the damper shaft extends less
than 0.79 in. (20 mm), install a shaft extension
recommended by the damper manufacturer.

Table 1: Accessories and Replacement Parts (Order Separately)

Code Number Description

DMPR-KC003

7 in. (178 mm) Blade Pin Extension (without bracket) for Johnson Controls® Direct-Mount Damper

Applications (quantity 1)

Note:

Available with damper and may be ordered separately

M9000-322

Weathershield Kit for Damper Application of VA9104, VA9203, VA9208, and VA9308/9310 Series Electric

Actuators (quantity 1)

M9000-400

Jackshaft Linkage Adapter Kit (quantity 1)

M9000-560

Ball Valve Linkage Kit for applying M9104, M9203, and M9208 Series Electric Actuators to VG1000 Series

Valves (quantity 1)

M9000-561

Thermal Barrier Kit for M9000-560 Ball Valve Linkage. Extends M(VA)9104, M(VA)9203, M(VA)9208, and

M(VA)9308/9310 Series Electric Actuators applications to include low pressure steam (quantity 1)

M9000-604

Replacement Anti-Rotation Bracket Kit for M9203, M9208, M9220, and M9300 Series Electric Actuators

(quantity 1)

M9000-606

Position Indicator for Damper Applications (quantity 5)

M9000-607

Position Indicator for VG1000 Series Ball Valve Applications (quantity 5)

M9203-100

Remote Mounting Kit with Crankarm Kit (quantity 1)

M9203-110

Universal Mounting Kit without Crankarm Kit (quantity 1)

M9203-115

Universal Mounting Kit with Crankarm Kit (quantity 1)

M9203-150

Crankarm Kit (quantity 1)

M9203-250

Remote Mounting Kit with Crankarm Kit and Damper Linkage for D1300 Dampers (quantity 1)

M9203-601

Replacement Standard Coupler Kit (with Retainer) for Mounting M9203 Series Electric Spring Return

Actuators (quantity 1)

M9203-602

Replacement Retainer for M9203 Series Electric Spring Return Actuators (quantity 5)

M9203-603

Adjustable Stop Kit for M9203 Series Electric Spring Return Actuators (quantity 1)

M9000-700

Universal Ball Valve Linkage Kit (Quantity 1)

«
1
2
3
4
5
...
»

Содержание M9203-AG-2 Series












Отзывы:

Нет отзывов