Johnson Controls JWS-3, Инструкция по установке и эксплуатации

Страница: 34 / 54

JWS-3 Operation Administration Tab
34 JWS-3 Installation and Operation Manual - P/N: 53550:Rev: A1 1/12/10
Diagnostic Information
Diagnostic information can also be displayed from the history tab. Under the diagnostic folder,
click the appropriate heading to display the following information:
• Authorization Log—a record of each time a user logged on or off the JWS-3, or attempted to
• E-mail Log—a record of E-mail notification messages sent by the JWS-3. Refer to
• General Log—a general record of information processed by the JWS-3 including internal
operations
• HTTP Log—a record of hypertext traffic the JWS-3 has handled
Up to 1000 of the most recent items of each type are shown.
4.7 Administration Tab
The Administration tab selections configure various JWS-3 settings. Administrators can decide
whether to allow all users, or only administrative users, to change settings.
4.7.1 E-mail Notification
Summary
The e-mail notification feature enables the administrator to configure the JWS-3 to automatically
send event information via e-mail to a select group of users. E-mail recipients receive events
according to the profiles they have been assigned. The JWS-3 can support a maximum of ten
profiles, and an e-mail recipient can be assigned to all ten profiles. Each of the ten profiles support
a maximum of five e-mail addresses.E-mail notification also provides the capability to send e-mail
directly from the JWS-3 in real time.

E-Mail Notification Features
The following lists some of the benefits that the e-mail notification feature provides:
• Ten Profiles
• Send up to 50 e-mails in response to any system event.
• Quickly Enable and Disable e-mail feature.
• Create your own custom messages that will be included with the e-mailed system event.
• Easily send e-mail “live” to any configured e-mail recipient.
E-Mail Configuration
You will need the following information from your Internet Service Provider (ISP) or Local Area
Network (LAN) administrator. The JWS-3 does not provide authentication information.
Outgoing Mail IP Address (SMTP)
This is the mail server’s IP address. The JWS-3 does not
support DNS; therefore, you will need the address in dotted decimal form
(XXX.XXX.XXX.XXX).
From Address (optional)
Enter an e-mail address if you want responses to be sent to if you set
up an E-Mail Profile and select Send Test Message. Also this is entry may not be an optional for
cell phone service provider systems that support e-mail.
NOTE: JWS-3 does not support e-mail servers that require e-mail authentication. Make sure
your e-mail server is not set to require e-mail authentication.