Johnson Controls IQ Panel 4, Руководство по установке, Страница: 9 / 178

INSTALLING THE PANEL
1 . With a small phillips
screwdriver, undo the
locking screw from the back
of the panel and remove the
SmartMount backplate.
1 . Mount the backplate to the
wall using appropriate hardware
ensuring it is level.
2 . A screw is required in break-
away wall tamper for UL 2610.
3 . Connect the power supply to
the barrel jack on the back of the
panel or to the (+) and (-)
terminals on the backplate if
using a custom length wire.
WALL MOUNT
1 . Latch the top of the IQ
Panel 4 onto the SmartMount
backplate.
2 . Swing the panel down
towards the backplate and
press firmly against the wall.
If using a custom length wire,
power terminals will
automatically connect and
provide power to the IQ Panel.
Note: For UL/ULC Commercial Burg installations (UL2610/ULC-
S304 Security Level II compliant) use only wall mount option
This product when installed as per these instructions does not present the risk of fire, electric shock, or injury to persons.
1
2
3
1
2
1
1 . With a small phillips
screwdriver, screw in the
locking screw from the
bottom of the panel to
secure it to the wall.
1