Johnson Controls FMS-2000C Скачать руководство пользователя страница 60

Страница: 60 / 62

FMS-2000C

LIT-12013504

If you upgrade an existing FMS-1655 Room Pressure Controller display and want to take advantage of the full FMS-2000C controller

improvements, contact

[email protected]

to assist with the following:

•

Update the controller firmware

•

Reconfigure the back plane board to regain the use of relay 4 and restore continuous power at the display interface terminal block.

This can be accomplished by re-configuring the three jumper options JP2, JP3, and JP4 on the bottom of the back plane board.

•

BACnet MS/TP trunk wiring needs to be relocated to the terminals at the back of the FMS-2000C controller display. This is optional

but updates to the latest BACnet/MSTP revision. See the

FMS-2000C Critical Environment Controller Installation Guide

for more

information.

If you upgrade an existing FMS-1655 Room Pressure Controller display with the FMS-2000C controller display and do not plan to

update the original FMS-1655 controller, the following considerations apply:

•

Thermostat function with seven distinct comfort ranges is not available, which includes ± 1, ± 2, ± 3, ± 4, ± 5, ± 10, ± 10

•

Relay 4 continues to be unavailable to end user

•

Power for the FMS-2000C controller display needs to be moved to +V terminal to disable display watchdog originally designed for

FMS-1655 controller display. See

FMS-2000C Critical Environment Controller Installation Guide

for more information.

Upgrading an existing FMS-1655 Room Pressure Controller display

Содержание FMS-2000C































































Результаты поиска

Содержание FMS-2000C

Отзывы:

Похожие инструкции для FMS-2000C

Бренды по названию

Популярные бренды

Johnson Controls FMS-2000C, Руководство пользователя

Результаты поиска

Содержание FMS-2000C

Отзывы:

Похожие инструкции для FMS-2000C

Бренды по названию

Популярные бренды