manualshive.com logo in svg

Johnson Controls FMS-1655L, Руководство по установке, Страница: 37 / 41

Поделиться
Скачать
Johnson Controls FMS-1655L Скачать руководство пользователя страница 37

JCI reserves the right to change product specifications without notice.

SUBHEAD

Due to continuous improvement, JCI reserves the right to change product specifications without notice.

- 

37 

-

•  Use a clean cloth that is dry, or lightly dampened with a mild cleaner or Ethanol. Be sure the cloth is only lightly dampened, not wet. Never 

apply cleaner directly to touch panel surface; if cleaner is spilled onto touch panel, soak it up immediately with absorbent cloth. 

•  Cleaner must be neither acid nor alkali (neutral pH).  

•  Wipe the surface gently; if there is a directional surface texture, wipe in the same direction as the texture.

•  Never use acidic or alkaline cleaners, or organic chemicals such as: paint thinner, acetone, tolulene, xylene, propyl or isopropyl alcohol, or 

kerosene.

Touching the current name text 

brings up an alphanumeric 

keyboard to quickly change the 

name of the monitored room.

Touching anywhere else on the 

screen enters the 

Main Setup 

Menu 

if no password is stored. 

Otherwise, a password must 

be entered before the 

Main 

Setup Menu

 can be accessed.

Touching the units brings up 

Engineering Units

 selection 

popup to quickly change 

differential pressure units.

Hot-Spot Features of FMS-1655L Touchscreen Display 

(Single sensor model)

Cleaning the FMS-1655L Display

Automatically reverts back 

to audible mode when alarm 

condition is removed.

Touch the Status line to invoke 

the popup screen to quickly 

change the isolation mode.

CLEANING THE DISPLAY

Содержание FMS-1655L










































Отзывы:

Нет отзывов