FIRECLASS Fire detection system
Check the FC-FI Connections
Installation Guide
Doc. version 2.0
24
10.4 Check the FC-FI Connections
The FC-FI connections are shown in Fig.
these are covered in this guide. For the numbered items
‘2’ and ‘3’, these should have been connected in earlier
steps, (which cross-references to this figure).
Fig. 20: FC-FI Connections
1
– Loops, supervised input 1, supervised input 2, sounder, alarm and fault relay, 24V, emergency alarm (EA).
2
– DC cable (black, twin conductor). Marked ‘XT9 PSU’ on the PCB.
3
– To the batteries. Marked ‘XT10 BAT’ on the PCB. See Section
“Install the Batteries - FC700 series” on page
1
2
3
2
3
