FEU2610 Field Equipment Controller Installation Instructions
1
Applications
The MS-FEU2610-0U controller is a member of the
Metasys
® system Field Equipment Controller (FEC) family.
The FEU26 is designed to run a variety of pre-engineered or user-programmed Heating, Ventilating, and Air
Conditioning (HVAC) applications, and provides the inputs/outputs required for these applications.
North American Emissions Compliance
Canada
United States
IMPORTANT:
The MS-FEU2610-0U controller is used in
Metasys
Release 8.1 smoke control applications and
is UL 864 UUKL/UUKLC 10th Edition Smoke Control Listed. You must refer to the
Metasys® System UL 864
10th Edition UUKL/ORD-C100-13 UUKLC Smoke Control System (LIT-12012487)
for detailed requirements and
procedures for installing, commissioning, and operating all UL 864 UUKL/UUKLC Listed
Metasys
system
devices. The UL 864 UUKL/UUKLC listing for Smoke Control Equipment is voided if (1) you do not use the
required software tools at the required versions; or (2) you do not meet the requirements or do not follow the
procedures as documented in the
Metasys® System UL 864 10th Edition UUKL/ORD-C100-13 UUKLC Smoke
Control System (LIT-12012487)
.
This Class (A) digital apparatus meets all the requirements of the Canadian Interference-Causing Equipment
Regulations.
Cet appareil numérique de la Classe (A) respecte toutes les exigences du Règlement sur le matériel brouilleur
du Canada.
This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when this equipment is operated in a commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference, in which case the user will be required to correct the interference at his/her
own expense.
FEU2610 Field Equipment Controller
Installation Instructions
MS-FEU2610-0U
Part No. 24-10143-543, Rev. B
Release 8.1
Issued March 2018
(barcode for factory use only)
