18
Technical Information
Service Manual
1. ON/OFF button
2. MODE button
3. FAN button
Press
ing
this button can turn on or turn off the air conditioner. After turning on the air conditioner, operation indicator " "on indoor
unit’s display is ON
showing a
green indicator
and indoor unit will give out a sound.
(
The color is different for different models
.
)
● When selecting auto mode, air conditioner will operate automatically according to
the
factory setting. Set temperature can’t be adjusted
and
will not be displayed. Press "FAN" button can adjust fan speed. Press "SWING" button can adjust fan blowing angle.
● After selecting cool mode, air conditioner will operate under cool mode. Cool indicator " "on indoor unit is ON. Press "▲" or " ▲ " button
to adjust set temperature. Press "FAN" button to adjust fan speed. Press "SWING" button to adjust fan blowing angle.
● When selecting dry mode, the air conditioner operates at low speed under dry mode. Dry indicator " " on indoor unit is ON. Under dry
mode, fan speed can’t be adjusted. Press "SWING" button to adjust fan blowing angle.
●
●
Note:
●
● Set temperature range from remote controller:
60.8°F~86.°F (
16
°C
~30
℃
)
;
f
an speed: auto, low speed, medium speed, high speed.
5. TURBO button
Under COOL or HEAT mode, press this button to turn to quick COOL or quick HEAT mode. " " icon is displayed on
the
remote
controller. Press this button again to exit turbo function and " " icon will disappear.
6. ▲/
▲
button
● Press
this
button once
to
increase or decrease set temperature
1°F (
1
℃
)
. Holding
either
" button
for 2s
,
the
set temperature on
remote
controller will change quickly. On releasing button after setting is finished, temperature indicator on indoor unit will change
accordingly.(Temperature can’t be adjusted under auto mode
.
)
● When setting TIMER ON, TIMER OFF or CLOCK, press "▲" or "▲" button to adjust time. (Refer to CLOCK, TIMER ON, TIMER OFF
buttons) When setting TIMER ON, TIMER OFF or CLOCK, press "▲" or "▲" button to adjust time. (Refer to CLOCK, TIMER ON, TIMER
OFF buttons)
Caution:
● Under AUTO speed, air conditioner will select proper fan speed automatically according to factory setting.
● Fan speed under dry mode is low speed.
Pressing this button can set fan speed
sequentially
as: auto (AUTO), low
( ),
medium
( ), high(
).
Press this button to select your required operation mode.
AUTO
COOL
FAN
DRY
HEAT
Auto
4. SWING button
Press
ing
this button can select
up and
down swing angle. Fan blow angle can be selected
sequentially
as below:
● When selecting " ", air conditioner is blowing fan automatically. Horizontal louver will automatically swing up
and
down at maximum angle.
● When selecting "
、
、
、
、
", air conditioner is blowing fan at fixed position. Horizontal louver will stop at the fixed position.
● When selecting "
、
、
" , air conditioner is blowing fan at fixed angle. Horizontal louver will send air at the fixed angle.
● Hold " "button
more than
2s to set your required swing angle. When reaching your required angle, release the button.
Note:
● "
、
、
" may not be available. When air conditioner receives this signal, the air conditioner will blow
the
fan automatically.
no display
(horizontal louvers stops at current position)
When selecting fan mode,
only the indoor fan will be on to circulate indoor air
, no cooling and no heating. All indicators are OFF. Press "FAN"
button to adjust fan speed. Press "SWING" button to adjust fan blowing angle.
When selecting heating mode, the air conditioner operates under heat mode. Heat indicator "
" on indoor unit is ON. Press "▲" or " ▲ "
button to adjust set temperature. Press "FAN" button to adjust fan speed. Press "SWING" button to adjust fan blowing angle. (Cooling only
unit won’t receive heating mode signal. If setting heat mode with remote controller, press
ing
ON/OFF button can’t start up the unit
.
)
For preventing cold air, after starting up heating mode, indoor
fan
will delay
until the indoor coil reaches preset factory temperature that is
controlled by the inlet pipe sensor. Normal for the preset temp is 92 degrees F.
Содержание DCX18CSB21S
Страница 51: ...43 ...
Страница 54: ...46 3 Malfunction of Protection of Jumper Cap C5 ...
Страница 72: ...64 Service Manual ...
Страница 89: ...81 ...
