![background image](http://html.mh-extra.com/html/johnson-controls/d600-ap/d600-ap_application-notes_2023689016.webp)
Connecting Serial Controllers to the P2000 Comark Server Running Software Version 3.11
Preliminary – This information may change.
16
2.
Using Belden 9773 (18 AWG, shielded, 3 twisted pair) or equivalent cable, wire the pins
from the S321-DIN serial port to a DB-9F connector according to Figure 10 and Table 8.
Figure 10: Digi One SP Connections
Table 8: Digi One SP DB-9F Connections
S321-DIN Wiring Base DB-9F Connector
+RS485
PIN 2
PIN 3
-RS485
PIN 6
PIN 9
REF
PIN 5
3.
Connect the DB-9F connector to the Digi One SP’s DB-9M connector.
4.
Run an Ethernet cable from the Digi One SP to your network connection.
5.
Connect the power cable to the Digi One SP and run to an appropriate 110/240 VAC
power source.
To install the driver for the Digi One SP and configure the device, download the driver and
configure the software according to the screen captures located at:
Do
not
install the driver provided with the Digi One SP or on the Digi Web site.
Use only the driver provided on the Johnson Controls File Transfer Protocol (FTP) site.