Johnson Controls CK722, Руководство пользователя

Страница: 13 / 32

CK722 Network Utility Tool Introduction
24-10239-30 Rev. D 1-5
This document contains confidential and proprietary information of Johnson Controls, Inc.
© 2016 Johnson Controls, Inc.
Terminal Emulation Software (Optional)
As an option, CK722 communication data can be viewed using the following
hardware and software:

RS232 Null Modem Cable (DB9F/F) – Black Box EYN257T-0015-FF or
equivalent (see “Null Modem Cable” on page
1-7 for more information)

Terminal Emulation Software (Tera Term Pro Preferred) – To use the free
Tera Term Pro software, download and install the latest version from the
following site:
http://hp.vector.co.jp/authors/VA002416/teraterm.html
N
OTE
The Tera Term Pro terminal emulation software was used in the
development of this document. Use of other terminal emulation programs
may differ.
For more information on configuring Tera Term Pro, see:

“Null Modem Cable” on page 1-7

“Connecting the Computer to the CK722” on page 2-1

“Configuring Tera Term Pro (Optional)” on page 2-5
Host Name Restrictions
The Host Name field on the Update Target dialog box (see page 2-8) is used to reset
the CK722 Item Reference name at the end of the update process. The Network
Utility Tool places restrictions on the Host Name of any CK722 controller. This
change is in response to Microsoft Corporation’s enforcement of an Information
Technology (IT) naming standard for the operating system used in affected engines.
Names must start with a letter, end with either a number or letter, and may contain
dashes only in the interior of the name.
If a CK722 controller has an existing name that violates the standards, and you
choose not to use the Update Target dialog box to rename the CK722 to a name that
follows the standards, the CK722 is given the name
NAE<MAC address> during
the update. You then can rename the CK722 via the database download process after
the update. Refer to the instructions for downloading the P2000SCT archive
database to a new CK722 controller in the
CK722 Commissioning Guide .
In the Update Target dialog box, if you enter a Host Name that violates the
standards, a message box appears warning you of the violation, and you must enter a
different name.