Copyright 2017
Johnson Controls
All Rights Reserved
No part of this document may be reproduced without the prior permission of Johnson Controls.
If this document is translated from the original English version by Johnson Controls, all reasonable endeavors will be used to
ensure the accuracy of translation. Johnson Controls. shall not be liable for any translation errors contained herein or for
incidental or consequential damages in connection with the furnishing or use of this translated material.
Due to continuous development of our products, the information in this document is subject to change without notice. Johnson
Controls shall not be liable for errors contained herein or for incidental or consequential damages in connection with furnishing
or use of this material. Contents of this publication may be preliminary and/or may be changed at any time without any
obligation to notify anyone of such revision or change, and shall not be regarded as a warranty.
Other Manufacturers’ Documentation
Johnson Controls does not duplicate documentation of other equipment manufacturers. When necessary, Johnson Controls
provides documentation that supplements that of other manufacturers. When unpacking your equipment, keep all original
manufacturer documentation for reference.
Technical Support
For factory technical support, Johnson Controls authorized field technicians or authorized dealer representatives can contact
Global Security Solutions Technical Support by phone at (866) 893-0423 or (414) 524-1214, or by email at
. They can also call the Field Support Center at (800) 524-1330 or (414) 524-5000 and
use options 6, 1, 7.
End users and customers should contact their local Johnson Controls branch or authorized dealer for any of their support needs
(technical support, maintenance contracts, on-site field support, P2000 Software Service Agreements, Service Partnerships, and
so on). Visit
http://www.johnsoncontrols.com/location-finder
to find your local Johnson Controls office.
For material returns contact the branch if the material was purchased through a Johnson Controls branch or through the Product
Sales Operations Team, if ordered through the Advanced Order Management System (AOMS) and follow the RMA process; or
contact the authorized dealer representative where the material was purchased directly.
Acknowledgments
Metasys
® and Johnson Controls® are trademarks of Johnson Controls. All other company and product names are trademarks or
registered trademarks of their respective owners.
Declaration of Conformity
United States:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
The user is cautioned that changes and modifications made to the equipment without approval of the manufacturer could void
the user's authority to operate this equipment.
Canada:
CAN ICES-3 (B)/NMB-3(B)
European Union:
This product complies with the requirements of the EMC Directive.
This equipment must not be modified for any reason and it must be installed as stated in the Manufacturer’s instructions. If this
shipment (or any part thereof) is supplied as second-hand equipment, equipment for sale outside the European Economic Area
or as spare parts for either a single unit or system, it is not covered by the Directives.
