Johnson & Johnson Surgical Vision Veritas, Руководство оператора

Страница: 132 / 270

Program Settings Z370584 Rev. D
6-10
Program Settings
Vitrectomy (VIT)
1. Tap to open the Settings screen.
2. Select a Vitrectomy submode on the left ( Figure 6-8 ).
Figure 6-8 — Vitrectomy Settings Screen
3. If desired, tap the submode name at the top of the screen (outlined in red in Figure 6-8 ) to
customize the submode name.
4. Select the pump type ( Peristaltic or Venturi ).
5. Use the up and down arrows to set the Aspiration rate (0 to 60).
6. Use the up and down arrows to set the Vacuum . If you are using Venturi, the range is 0 to
600. If you are using Peristaltic, the range is 0 to 650.
7. Use the up and down arrows to set the Cut Rate (50 to 2500).
NOTE: You must make a foot pedal selection for ICA, IAC, or Side Vitrectomy (VIT),
which determines how the vitrectomy cutter activates as you press the foot pedal from
Positions 1 through 3 only. See
“Vitrectomy Foot Pedal Modes” on page 5-8 .
8. Select the delivery mode ( Linear or Panel ).
9. Set the Bottle Height (Advanced Fluidics) or Total Height (Advanced Infusion).