User Guide
DONKEY
- M1
7
3. Power Recharge
3.1 Power Recharge for Main Unit
Please find the power charge port in bottom of the robot.Connect one side into the power
charge port, the other side into the standard power socket. Please power on the robot
until the power indicator shows blue light constantly.
Note: Do not power on the robot with any mopping pads. If you want to use the robot,
please cut off the power adapter.
The power charging time is slightly different upon working temperature,floor materials
etc. When the temperature is lower than 0˚, the robot can not recharge.
Power Charge Port
3.2 Power recharge for GPS Navigator
For 1st use, please adjust the switch in bottom of GPS navigator from “0” to “1”. If not
use for long time, please adjust the switch to “0”
- Charge the Navigator by USB cable:
- Connecting the charging port (in bottom of navigator) in one side and connecting the
power by USB port in another side.
- Please charge the navigator until the GPS indicator gives out green light constantly.
