User Guide
DONKEY
- M1
11
Stop/Continue
Donkey will stop cleaning if it’s lift up or it’s function keys are pressed.When Donkey is
paused to work, the function keys of
“Deep Clean” or “Fast Clean” will give out flashing
blue light. Meanwhile,
Donkey has saved the map of cleaned area.
If you want to continue cleaning, please put
Donkey within 2 meters away from the GPS
navigator. Then place
Donkey back in the same starting point. Press again the flashing
function key.
Donkey will continue to clean the non-cleaned area after confirming the location in the
map.
Donkey can both clean the cleaned area and non-cleaned area.If you want Donkey
to clean in suspended location,it’s required more time to confirm its location. And the
preparation time is related with the distance between
Donkey and GPS navigator.
If you want to stop cleaning, keep pressing the power key for 2 seconds.
Donkey will be
turned down.
7. GPS Navigator
7.1 Build up connection between GPS Navigator and Main Unit
When
Donkey robot is trying to build up the connection, one of the indication light on
the robot will give out flashing blue light. After it’s connected,all the 3 indication lights will
give out constant blue light.
If the robot is removed outside the scope of GPS navigator, all the 3 indication lights on
the robot will go out.
To confirm the location of GPS navigator,the robot will move forwards it sometimes. After
confirming, it continue to clean.
If the cleaning work is paused, the robot will save its cleaning map. After finish the whole
room, the robot will build up a new map.
Clean without GPS Navigator
Donkey mopping robot can work without GPS navigator/ But the cleaning area will be
reduced. And it can not clean effectively the edges of each area.
