2 Lines
Normal slats
1 Line
Normal slat
2 Lines
Wide slats
2 Lines
Wide slats
2 Lines
Normal slats
2 Lines
Normal slats
4 Lines
Wide slats
ZONE 2
ZONE 1
ZONE 5
ZONE 7
ZONE 6
ZONE 4
ZONE 3
Diagram 1
D
I
4
5
(x8)
(x7)
4.
5.
C.
D
I.
H.
Side Caps x 14
.
Wide Centre Caps
x 8
Wide Side Caps
x 16
Wide Slats x 16
Slats x 14
Step Six
With the curved side facing upwards, insert 2 slats into a centre cap then into 2 side caps on either
end(x15). (Please note the Wide Slats must be inserted with the Wide Centre Caps (H) and Wide
Side Caps (I)). Repeat this process for all slats.
Note: Please see the Diagram 1 below to arrange the slat with the correct system).
4
4
C H
5
5
Centre Caps x 7
H
I
I
D
D
4
4
5
5
C
Starting with the Headboard (1), insert the Legs (7) into the pre-drilled holes on the underside of the Headboard (1)
and twist to secure, as shown in the diagram below.
Legs x 4
7.
5/7
Step Five
7
7
FOOTBOARD
2
3
1
HEADBOARD
3
Note: Before proceed to the next step, ensure the wooden base on each part are parallel towards each other
by adjusting the bolt on the bottom.
