Note: Make sure the Side Rail (3) which has sticker (HEAD) is attach on Headboard
3/7
Step One
Step Two
Attach the Wooden Base (8) into the side on the Headboard (1) using the M6 x 55mm Bolt (G), and M8 Washer (J).
Do not tighthen the bolt until all part attached.
1
J.
G.
8.
M8 Washer x 2
Wooden Base
x 2
M6 x 55mm x 2
M4 Allen Key
x 1
B.
M4 (B)
M6 x 55mm(G)
M10 x Washer(J)
8
8
1
Before attach the Side Rails (3) with the side of Headboard (1), rest the headboard down to the carpeted or soft
flooring as shown in Fig 1. Only then you can attach both using M6 x 55mm Bolt(G) and M6 Washer (F) as
shown in Fig.2.
Continue attach the Side Rails (3) to the Front Headboard (1) using M6 x 40mm Bolt (E) and M6 Washer (F).
Adjust the Side Rails (3) with the Headboard (1) and make sure the edges align perfectly.Tighten M6 x 55mm Bolt(G)
first using M4 Allen Key (B), and then continue to tighthen the M6 x 40mm Bolt (E) to
secure in place
HEAD
Carpeted or
soft flooring
Flip over
Fig.1
x2
x2
Fig.2
Fig.3
HEAD
3
M6 x 55mm (G)
M6 Washer (F)
SIDE
1
M6 x 40mm Bolt
x 4
M6 x 55mm Bolt
x 2
E.
G.
F.
M6 Washer x 6
HEAD
1
3
M6 x 40mm
(E)
(F)
(F)
(G)
M4(B)
Tighten
first
Tighten
last
