01
02
Description
Image
Quantity
Parts list
Introduction
Thank you for purchasing this Shelby Floor lamp.
Please read the instructions carefully before
use to ensure safe and satisfactory operation
of this product.
Warnings
This product is Class II.
This lamp is for indoor use only.
The supply cord cannot be replaced. If the cord is damaged, the table lamp should be
destroyed in order to avoid a safety hazard.
3 x 5 watt energy efficient GU10 LEDS
Bulb replaceable
Bulb not included
Recommended
bulb
Product assembly
1
1
A
B
B
A
B
C
D
Lamp Body
Carefully unpack the carton, making sure all parts are
included before assembly. Place lamp parts on a flat
surface.
Screw pole ( A ) clockwise into pole ( B ) until tight.
GU10 LED Bulbs Only
2
B
C
B
Screw pole ( B ) clockwise into pole ( C ) until tight.
3
C
D
Screw pole ( C ) into base ( D ) until tight.
4
F
Then get the remaining slack of the power cord out
carefully from point ( F ).
Insert GU10 LED Bulbs into socket.
Untie the tie securing cable before use.
Note: Turn lamp on and off with the foot switch.
Please ensure that all screws and small pieces are properly tightened to the product,
especially on the top part of the pole.
The bulb is not included with tis lamp. Please visit your local store to purchase the
bulb prior to assembly.
B
C
D
A
B
C
D
A
F
B
C
C
E
D
D
F
