John Lewis JLFZW1604 Скачать руководство пользователя страница 8

Child Lock Function

The Child Lock function is activated by
pressing key (D) (several times if necessary)
until the corresponding icon appears   .
You must confirm the choice by pressing key
(E) within few seconds. You will hear the
buzzer and the icon remains lighted. In this
condition any possible operation through
the keys does not cause any change as long
as this function is activated.
It is possible to de-activate the function at
any time by pressing key (D) until the
corresponding icon will flash and then key
(E).

Temperature alarm

Temperature increase in the freezer
compartment (for example due to an power
failure or door is open) is indicated by:

• flashing temperature
• flashing icon 
• acoustic buzzer
When normal conditions are restored:
• the acoustic alarm will stop
• the temperature value continues to flash
• the Alarm icon continues to flash
When you press button (E) to deactivate
the alarm, the highest temperature reached
in the compartment appears on indicator

 for some seconds.

Then it returns on the normal operation
showing the temperature of the selected
compartment.
During the alarm phase, the buzzer can be
switched off by pressing button (E).

First use

Cleaning the interior

Before using the appliance for the first time,
wash the interior and all internal accessories
with lukewarm water and some neutral soap
so as to remove the typical smell of a brand-
new product, then dry thoroughly.

Important!

 Do not use detergents or

abrasive powders, as these will damage the
finish.

Daily Use

Use of the freezer
compartment

The symbol 

 means that the

freezer is suitable for freezing fresh food and
for long term storage. The temperature may
be regulated between -15°C and -24°C. We

suggest setting the temperature to -18°C,
which is optimal for energy consumption and
frozen food storage.

8

Содержание JLFZW1604





















Отзывы: