John Lewis JLFFS1833, Руководство пользователя

Страница: 17 / 28

Problem Possible cause Solution
Water flows inside the refrigera-
tor. The water outlet is clogged. Clean the water outlet.
Food products prevent water
from flowing into the water collec-
tor. Make sure that food products do not
touch the rear plate.
Water flows on the floor. The melting water outlet is not
connected to the evaporative tray
above the compressor. Attach the melting water outlet to the
evaporative tray.
Temperature cannot be set. The Fast freeze or Shopping mode
function is switched on. Switch off Fast freeze or Shopping
mode manually, or wait until the func-
tion resets automatically to set the
temperature. Refer to "Fast freeze or
Shopping mode function".
The temperature in the appliance
is too low/too high. The temperature regulator is not
set correctly. Set a higher/lower temperature.
The food products temperature is
too high. Let the food products temperature
decrease to room temperature be-
fore storage.
Many food products were stored
at the same time. Store less food products at the same
time.
The Fast freeze function is switch-
ed on. Refer to "Fast freeze function".
Side panels of the appliance are
warm. This is a normal state caused by
operation of the heat exchanger. Make sure that there is at least 30 mm
of space between each side of the ap-
pliance and the surrounding furniture
when the ambient temperature ex-
ceeds 38°C.
There is too much condensed wa-
ter on the rear wall of the refriger-
ator. Door was opened too frequently. Open the door only when necessary.
Door was not closed completely. Make sure the door is closed com-
pletely.
Stored food was not wrapped. Wrap food in suitable packaging be-
fore storing it in the appliance.
Door does not open easily. You attempted to re-open the
door immediately after closing. Wait a few seconds between closing
and re-opening of the door.
Fridge Freezer User Manual 17