John Lewis JLBIMW02, Руководство пользователя

Страница: 27 / 44

1. Activate the appliance.
2. Set a heating function.
3. Press
again and again until the display
shows: Duration.
4. Set the time.
5. Press
again and again until the display
shows: Set + Go.
6. Press to confirm.
Press any symbol (except for ) to start the
function: Set + Go. The set heating function
starts.
When the heating function ends, an acoustic
signal sounds.
• Function Lock is on when the
heating function operates.
• The menu: Basic Settings lets you
activate and deactivate the
function: Set + Go.
Automatic Switch-off
For safety reasons the appliance deactivates
automatically after some time if a heating
function operates and you do not change any
settings.
Temperature (°C) Switch-off time (h)
30 - 115 12.5
120 - 195 8.5
200 - 230 5.5
The Automatic switch-off does not
work with the functions: Light, End
Time, Duration.
Brightness of the display
There are two modes of display brightness:
• Night brightness - when the appliance is
deactivated, the brightness of the display is
lower between 10 PM and 6 AM.
• Day brightness:
– when the appliance is activated.
– if you touch a symbol during the night
brightness (apart from ON / OFF), the
display goes back to the day brightness
mode for the next 10 seconds.
– if the appliance is deactivated and you set
the function: Minute Minder. When the
function ends, the display goes back to the
night brightness.
Cooling fan
When the appliance operates, the cooling fan
activates automatically to keep the surfaces of
the appliance cool. If you deactivate the
appliance, the cooling fan can continue to
operate until the appliance cools down.
Microwave Oven User Manual 27