01
02
Description
Image
Quantity
Parts list
Introduction
Thank you for purchasing this Huxley Table Lamp.
Please read the instructions carefully before
use to ensure safe and satisfactory operation
of this product.
Warnings
This product is Class II.
This lamp is for indoor use only.
The supply cord cannot be replaced. If the cord is damaged, the table lamp should be
destroyed in order to avoid a safety hazard.
Do not over tighten the glass shade. If the shade is screwed down too tight the glass
could be break.
The bulb is not included with this lamp. Please visit your local store to purchase
the bulb prior to assembly.
G9 LED Bulb only
Glass Shade
1 PC
1 PC
Lamp Base
1 x 4 watt energy efficient G9 LED
Bulb replaceable
Bulb not included
Recommended
bulb
Product assembly
1
3
2
Install the G9 LED bulb into the socket of the lamp
base (C).
Screw glass shade (A) onto the socket of lamp base (C).
Note: Do not over tighten the glass shade (A), if it is
screwed down too tight the glass could be break.
Untie the tie securing cable before use.
Note: Turn lamp on and off with the rocker switch.
C
C
A
4
C
B
Place the silicone Ring (B) on the socket of lamp base
Carefully unpack the carton, making sure all parts are
included before assembly. Place lamp parts on a flat
surface.
(C).
1 PC
Silicone Ring
B
A
C
Do not use a G9 LED bulb longer than 6cm to avoid puncturing the glass shade.
B
C
C
A
