John Lewis 944182410, Руководство пользователя

Страница: 35 / 44

How to remove and install:
Door
You can remove the door and the internal glass
panels to clean it. The number of glass panels is
different for different models.
Warning! The door is heavy.
Caution! Carefully handle the
glass, especially around the
edges of the front panel. The
glass can break.
Step 1 Fully open the door.
A
A
Step 2 Fully press the clamping levers (A)
on the two door hinges.
Step 3 Close the oven door to the first opening position (approximately 70° angle). Hold the door at
both sides and pull it away from the oven at an upwards angle. Put the door with the outer side
down on a soft cloth on a stable surface.
Step 4 Hold the door trim (B) on the top
edge of the door at the two sides
and push inwards to release the clip
seal.
1
2
B
Step 5 Pull the door trim to the front to
remove it.
Step 6 Hold the door glass panels on their
top edge one by one and pull them
up out of the guide.
Step 7 Clean the glass panel with water
and soap. Dry the glass panel care-
fully. Do not clean the glass panels
in the dishwasher.
Step 8 After cleaning, do the above steps
in the opposite sequence.
Oven User Manual 35