John Greenleaf 276KFDC Скачать руководство пользователя страница 1

Rev. 10/05

For normal household use only. 

 recommended for commercial use.

Do not climb, sit or stand on this piece of 
furniture.

Unload items from this unit prior to moving. 

Do not overload shelves on this unit.

Before loading or moving this unit, check all screws 
and supports for tightness. 

For maximum stability, attach unit to the wall using 
the enclosed hardware as per instructions.

Production Code:

Service Policy:

 

We will replace any parts 

which  are defective, missing or damaged 
during assembly. Please contact Whittier 
Wood Products customer service department 
directly (by phone, fax, mail or email) for 
replacement parts.

Hours:

 Our friendly customer service staff 

can be reached Monday-Friday 7:00 a.m. to 
5:00 p.m. (Pacific Time). A message can be 
left 24 hours a day, 7 days a week. 

To Order:

 Provide the complete furniture 

model number (upper left corner of this 
page), part letter, production code, quantity 
needed, reason for replacement and your full 
name and address along with a telephone 
number in case we need to contact you.

Parts ship from our Eugene, Oregon factory 
within 1 or 2 business days from the time 
we receive the request. Please allow 5-10 
business days for delivery.

 

Outside U.S. or Canada: 541-687-0213

Outside U.S. or Canada: 541-687-0213

Fax: 541-687-2060 • Email: [email protected]

Fax: 541-687-2060 • Email: [email protected]

Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.

Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.

Natural 

characteristics 

such as knots 

provide a 

natural feel.

Model #

276KFDC

DISTRESSED ANTIQUE CHERRY FINISH

Tuscan Pantry

Assembly Instructions

Congratulations!

This fine piece of furniture will make a handsome 
addition to your home. For the best results, start by 
reading both the Assembly Instructions and 
Gluing Hints before you begin your project.

  Read both the Assembly Instructions and Gluing Hints 

completely before beginning. 

  Store the parts: 1) in their box; 2) in a dry place; 3) in 

temperatures ranging from 40° to 90°. (Not on a cold, 
possibly damp, cement floor.) 

  Inspect your furniture periodically for any loose glue 

joints or screws, or any other problem which may 
be affecting the stability of your furniture. Tighten or 
repair as needed.

P.O. Box 2827
Eugene, OR 97402 USA

Содержание 276KFDC










Отзывы: