John Bean VPI System IV, Руководство по эксплуатации

Страница: 48 / 67

86
5.5.3.3-2
5.5.3.3-1
5.5.3-2a/2b
Changes to the date and time are immediately active
and
are retained when the machine is next started without
needing to be saved to the permanent memory.
* = Factory adjusted mode
5.5.3.2 Counters
Every measuring run actually completed is stored.
Maximum count is 999,999 runs. Once this number is
reached, the counter is reset to zero. The information
is primarily useful for statistical purposes, e. g. to obtain
evidence of load intervals of parts when defective, or
of monthly (yearly) use of the machine, etc. The
measuring runs performed while the machine is on are
transferred into the permanent memory and added
when it is switched off. The counter cannot be reset or
changed.
Counter (total spins / spins with o.k.)
Total spins = Total number of measuring runs
Spins with o.k. = Number of measuring runs where
balance quality was considered OK
Counter (optimization runs)
Optimization runs = Number of optimizations or
minimizations.
Counter (since last calibration / service)
Since last calibration = Number of measuring runs since
the last calibration
Service = Number of measuring runs in service mode
5.5.3.3 Input of promotional text
•
Press menu key F2 (Fig. 5.5.3.3-1) in FUNCTION
screen.
The TEXT EDITOR screen (Fig. 5.5.3.3-2) with
character set and text field appears. The cursor in each
of these fields can be moved by means of its own toggle
switch (F3 and F5).
Fig. 71 TEXT EDITOR
Assignment of menu fields
F1 Save text
F2 Not assigned
F3 Toggle key, four functions: move the cursor within
the character set
F4 Transfer characters from the character set to the
text field
F5 Toggle key, four functions: move the cursor within
the text field
F6 Not assigned
Text field
The text field comprises five lines of 25 character