background image

 

 

29

5 MAINTENANCE, 

TROUBLESHOOTING 

AND 

WARRANTY 

5.1 Maintenance 

 

Overview 
 
 
 

 

5.1.1 Cabinet 

maintenance 

 

The cabinet is made of solid wood and wood veneer. 

 

„

 

Do not use furniture polish or teak oil to clean the organ 
cabinet. 

„

 

Direct sunlight may discolour the organ cabinet. 

 

1.  Clean the cabinet with a damp cloth. 
2.  Rub the cabinet dry with a lint-free cloth. 

 

5.1.2  Maintenance of the manuals 

 

The manuals are plastic. 

 
Do not use aggressive cleaning agents such as paint thinner or 
acetone to remove dirt. 
 

1.  Clean the manuals with a damp cloth. 
2.  Rub the manuals dry with a lint-free cloth. 
3.  Remove any scratches with car polish. 

 

5.2 Problems 

 

Overview 
 
 

 
 
 
 
 
 
 
 

Component

 

Maintenance

Frequency

Cabinet

 

Cleaning. See § 5.1.1.

As required

Manuals

 

Cleaning and removing scratches. 
See § 5.1.2.

As required

Problem

 

Cause

Solution

 

Pedal does 
not work 
properly

 

The pedal magnet is making poor 
contact with the magnetic switch at 
the rear of the pedalboard.

Reposition the 
pedal. See § 
5.2.1.

 

Organ 
functions do 
not work 
properly

 

The organ is not earthed.

Connect the 
organ to an 
earthed power 
socket. 
 

Содержание Vivaldi 15


































Отзывы: