Johannus Symphonica 35, Руководство пользователя

Страница: 26 / 34

26
4.15.10 Startup Settings
The Startup Settings mode saves the required default intonation in the
memory.
Intonation:
1. Press the MENU button.
2. Use the - and + buttons to select the
Startup Settings
mode.
3. Press the SET button. The display shows the set intonation.
4. Use the - and + buttons to select an intonation (
Romantic
,
Symphonic, Baroque
or
Historic
) that must be enabled when
switching on the organ.
5. Press the SET button. The selected intonation is saved in the memory.
After this, the
Chorus on
or
Chorus Off
option appears on the
display.
6. Use the - and + buttons to select whether the Chorus (CH) accessory
must be enabled or disabled when switching on the organ.
7. Press the SET button.
Acoustics:
1. Press the MENU button.
2. Use the - and + buttons to select the
Startup Settings
mode.
3. Press the SET button a few times until the option
Ext. Reverb On
or
Ext. Reverb Off
appears.
4. Use the - and + buttons to select whether the 3D 2.1 Surround
acoustic system must be enabled or disabled when switching on the
organ.
5. Next, the option to adjust the left and right volume of the 3D 2.1
Surround acoustics system appears on the display.
6. Use the - and + buttons to set the required volume of the left channel
(
Level Left
). Press the SET button.
7. Use the - and + buttons to set the required volume of the right channel
(
Level Right
). Press the SET button.
Harpsichord:
1. Press the MENU button.
2. Use the - and + buttons to select the
Startup Settings
mode.
Press the SET button a few times until the option
Harpsichord
Mode Enabled
or
Harpsichord Mode Disabled
appears. See
§3.4.
3. Use the - and + buttons to select Enabled or Disabled. Press the SET
button.
4. Next, the
Harpsichord Reverb Prog......
option appears.
Use the - and + buttons to select the required acoustics. See § 3.4.
5. Press the SET button.
6. After this, the option for setting the volume of the selected acoustics
appears.
7. Use the - and + buttons to select the required acoustics volume. Press
the SET button.
8. After this, the option for setting the tweeters volume appears.