Johannus Rembrandt 377 AGO, Руководство пользователя

Страница: 20 / 36

20
1. Check that the key switch is to the right.
2. Select the desired stops.
3. Push the SET piston in. Hold the piston down.
4. Press the desired preprogrammed memory location (PP-T) in.
5. Release the preprogrammed memory location piston (PP-T).
6. Release the SET piston.
4.11 Easy Menu
The Easy Menu is an operating system whose settings can be read on the
display. The Easy Menu is operated with the - and + pistons, the SET and
the MENU pistons.
The Easy Menu consists of the following functions:
„
Capture memory (directly accessible)
„
Generaal volume (directly accessible)
„
Transposer (directly accessible)
„
Tuning Mode
„
Temperaments
„
Programming your own temperament
„
Keyboard Mode
„
Reset Procedures
„
Data Dump
„
Demo Songs
„
Standard Intonation
„
General Crescendo
„
Programming MIDI stops
„
40 extra o rchestrals (CSM)
4.11.1 Capture memory
By using the capture memory, a registration can be activated with just one
piston. The capture memory consists of 100 levels. Each level has 8
memory locations. These levels can be seen on the display (
Mem:..
).
The 800 capture memory locations are empty at the start and can be
programmed by the musician.
There is a capture memory option for the entire organ (General) and for each
separate division (Divisionals). You can call up 800 capture memory
locations per division.
The functions in the Easy Menu can only be selected when the
memory lock is open. This can be seen on the SET piston. If this is
not lit, the memory lock is closed.