background image

7

2.2

Placing the music desk

There are two ways to place the music desk on the organ, depending on the 
model organ that you have.

Placing the music desk with a Rembrandt 275 or 375

1. Unfold the fastening rods at the rear of the music desk.
2. Slide the fastening rods into the appropriate openings on top of the 

organ.

The height of the music desk can be set as follows:
1. Squeeze the handles at the rear of the music desk and, at the same time, 

slide the music desk to the desired height.

2. Release the handles to fix the height of the music desk.

Placing the music desk with a Rembrandt 395 or 495

1. Place the music desk in the appropriate slots. These slots are in the 

outside of the cabinets with drawstops.

2.3

Switching on

Switch the organ on with the on/off piston at the right, next to the manuals. 
Wait several seconds. Starting the control functions and the settings takes a 
little time.
The lamps of the on/off and 0 pistons light and the settings appear on the 
display.

2.4

Transport and storage

Pay attention to the following during transport and storage:

„

Remove the music desk and the pedalboard from the organ.

„

Relative humidity within the storage area: 10 to 90%.

Fold the music desk forward to close the rolltop cover.

Содержание REMBRANDT 275




































Отзывы: