Johannus REMBRANDT 275, Руководство пользователя

Страница: 17 / 35

17
4.4 Factory intonation
Save the intonation settings
1. Connect a PC to the organ. Use the MIDI SEQ. output, see § 3.7.
2. Save the intonation settings on the PC using the intonation programme
of Johannus.
Restore the factory intonation
1. Switch off the organ.
2. Press pistons 1 and 8. Hold the pistons.
3. Switch on the organ.
4. Wait until the lamp in the 0-piston lights up.
5. Release pistons 1 and 8.
4.5 Stops
The stops are activated by means of draw stops or through the capture
memory. See § 4.11.1. The lamp in the draw stop is lit when the associated
stop is active.
The stops have been divided into four main groups:
„
Pedalboard : Activates the stops associated with the pedalboard.
„
Great : Activates the stops associated with the Great.
„
Swell : Activates the stops associated with the Swell.
„
Choir : Activates the stops associated with the Choir (only with an organ
that has three keyboards).
„
Solo : Activates the stops associated with Solo (only with an organ that
has four keyboards).
In order to save the intonation settings, you need the Johannus
intonation programme.
The current intonation settings will be lost if the settings are not
saved on a PC.