
User’s Manual
Rembrandt 200, 300, 2000 and 3000 AGO
JOHANNUS
JOHANNUS
26
Programming the general crescendo
A stop combination in the general crescendo can be changed as follows:
1. Make the memory accessible by turning the MEMORY LOCK a quarter turn to the right. The
SET piston will light up to indicate the memory can be accessed.
2. Push the pistons GC and PGM. The display will show a 0 (level 0, meaning all stops of the
general crescendo off).
M e m :
1
V o l : 1 2
T u n e : 4 4 0
T r a n s :
0
C r e s c e n d o :
0
Also all stops will switch off. Changing the general crescendo pedal will have no effect
anymore.
3. Choose the level of the general crescendo you want to change by pushing one or more times
on the - or the + piston until the display shows the level you want to change. (E.g. level 5).
M e m :
1
V o l : 1 2
T u n e : 4 4 0
T r a n s :
0
C r e s c e n d o :
5
The stops that belong to this level in the general crescendo will light up.
4. Choose the personal registration for the level ( in this case level 5) of the general crescendo
you want to store in the general crescendo memory.
5. Push the SET piston. As long as you push the SET piston a P will show up in the display to
indicate that the personal registration is programmed into the general crescendo memory.
M e m : P 6
V o l : 1 2
T u n e : 4 4 0
T r a n s :
0
C r e s c e n d o :
5
6. Close the general crescendo memory by turning the key switch MEMORY LOCK a quarter
turn to the left and eventually remove the key from the switch. The light in the SET piston will
go off to indicate that the memory is not accessible anymore.
7. Push the PGM piston again to switch it off. The general crescendo can be used as normal
again.