User’s Manual
Rembrandt 200, 300, 2000 and 3000 AGO
JOHANNUS
JOHANNUS
17
The adjusted pitch you can read in the display:
M e m :
1
V o l : 1 2
T u n e : 4 4 0
T r a n s :
0
C r e s c e n d o : O f f
The pitch can be adjusted in the following way:
1. Push piston TUNE. As long as the light in the thumb piston lights up you can adjust the pitch.
2. Adjust the desired pitch by pushing the - or the + piston one or more times.
3. After some seconds the lights of the piston TUNE as well as the - and the + piston will be
switched off automatically.
The pitch setting has not been stored and will be erased when you switch off the organ.
You may program a pitch setting as follows:
1. Make the memory accessible by turning the MEMORY LOCK a quarter turn to the right. The
SET piston will light up to indicate the memory can be accessed.
2. Push the TUNE Piston. As long as the light of the TUNE piston remains lighting up you can
change the volume setting.
3. Adjust the desired pitch by pushing the - or + piston as many times as necessary to reach
the desired pitch.
4. Push the SET piston when the right pitch level has been reached. As long as you push the
SET piston a P will show up in the display to indicate that the chosen pitch setting is being
programmed.
M e m : P 6
V o l : 1 2
T u n e : 4 4 0
T r a n s :
0
C r e s c e n d o : O f f
The programming into the memory can be done only if the piston TUNE lights up. After
some seconds the lights of the TUNE as well as the - and + pistons will switch off
automatically.
5. Close the memory by turning the key switch MEMORY LOCK a quarter turn to the left and
eventually remove the key from the switch. The light in the SET piston will go off to indicate
that the memory is not accessible anymore.
The volume setting has been stored in the memory. Every time the organ will be switched
on from now on the in the memory programmed volume setting will be chosen automatically.
