Johannus Opus 250, Руководство пользователя

Страница: 16 / 40

User Manual Opus 250/350 16
Calling up a pre-programmed memory location:
Press a pre-programmed memory location (PP-T or PL). The active stops light up.
Programming a pre-programmed memory location:
1. Select the desired stops.
2. Press the SET piston. Hold in the piston.
3. Press the desired pre-programmed memory location (PP-T or PL).
4. Release the SET piston.
4.9 Capture memory:
Through use of the capture memory, a registration can be made active with just
one piston.
The capture memory consists of 75 levels.
These levels can be seen on the display (
Mem:…
). Each level has eight memory locations
(pistons 1-8). The 600 capture memory
locations are not pre-programmed and can be programmed by the musician.
Programming a capture memory location:
1. Select the desired stops.
2. Use the - and + pistons to select a level (1-75) on the display.
3. Press the SET piston. Hold in the piston.
4. Press the desired memory location (1-8).
5. Release the SET piston.
Calling up a capture memory location:
1. Use the - and + pistons to select the desired level (1-75) on the display.
2. Press the desired memory location (1-8). The active stops light up.
4.10 Transposer
The Transposer function shifts the pitch by half-tone increments (from -8 to +8).
The transposer setting can be read on the display
(
Tr: …
).
The current setting of the capture memory location will be lost.
Although it is possible to store any registration under a piston of a pre-
programmed memory location it is advisable to select a registration matching the
text of the piston.
The current setting of the pre-programmed memory location will be lost.
Opus 250 Mem: 1
Tr: 0/440 Cr:--
Opus 250 Mem: 1
Tr: 0 /440 Cr:--