Johannus Opus 15, Руководство пользователя

Страница: 17 / 31

17
„
General Crescendo (option)
„
Programming MIDI stops
4.11.1 Capture memory
By using the capture memory, a registration can be activated with just one
piston. The capture memory consists of eight levels. Each level has eight
memory locations. These levels can be seen on the display (
Mem:..
).
The 64 capture memory locations are empty at the start and can be
programmed by the musician.
Programming a capture memory location
1. Select the desired stops.
2. Use the - and + pistons to select a level (
1-8
) on the display.
3. Push the SET piston in. Hold the piston down.
4. Push the desired memory location (1-8) in.
5. Release the SET piston.
Calling up a capture memory location
1. Use the - and + pistons to select the desired level (
1-8
) on the display.
2. Push the desired memory location (1-8) in. The active stops light up.
4.11.2 General Volume
The set volume can be read on the display (
Vol:..
).
1. Push the VOL piston in.
2. Use the - and + pistons to set the volume.
3. Press the SET piston to save the volume in the memory.
The current setting of the capture memory location will be lost.
The volume can only be programmed when the VOL. piston is lit.
The volume change is in the memory. When the organ is switched
on again, the programmed volume will be active.