Johannus Ecclesia Choir, Руководство пользователя

Страница: 13 / 36

User Manual Ecclesia Choir / Ecclesia T-150 13
off, the reed stops that were on are activated again. Use the RO piston to activate
the Reeds Off function.
S/S: All swells to swell
All Swells to Swell transforms the swell pedal for the Swell to a swell pedal for the
whole organ.
0: Recall / Reset function
The 0 piston cancels registration in two ways:
1. A short press on the 0 piston: Only the last change is cancelled.
2. A long press on the 0 piston: All registrations are cancelled.
SEQ- and SEQ+: Sequence - and +
Sequence is a function for sequential selecting capture memory locations.
1. Select a capture memory location to start (for example level 2, location 2).
2. Use the SEQ- or SEQ+ pistons to select the previous or next capture memory
location.
4.8 Capture memory
4.8.1 Pre-programmed memory locations
Pre-programmed memory locations are available by operating pistons PP to T and
PL. These seven memory locations have factory settings (presets) appropriate for
the quiet pianissimo to the loud tutti and the classic plenum.
Calling up a pre-programmed memory location:
Press a pre-programmed memory location (PP-T or PL). The active stops light up.
Programming a pre-programmed memory location:
1. Select the desired stops.
2. Press the SET piston. The piston lights up. Hold in the piston.
3. Press the desired pre-programmed memory location (PP-T or PL).
4. Release the SET piston.
If the SET piston does not light up when pressed, programming of a memory
location is locked. See § 4.8.3 Memory lock
Although it is possible to store any registration under a piston of a pre-
programmed memory location it is advisable to select a registration matching the
text of the piston.
The current setting of the pre-programmed memory location will be lost.
If no expression pedal is configured as a swell pedal for the Swell, the S/S piston
cannot be activated.