Johannus D-470, Руководство пользователя

Страница: 21 / 44

User Manual Ecclesia T-270 / T-370 / D-470 / D-570 21
Step 0 of the crescendo pedal cannot be changed.
5 JOHANNUS MENU
In the Johannus Menu several functions of the organ can be set.
Press the MENU piston to activate the Johannus Menu on the display.
Navigating the menu is done with the - and + pistons.
Confirmation of a choice is done with the SET piston.
Cancel or step back in the menu is done with the MENU piston.
The Johannus Menu consists of the following functions:
Function More information
Crescendo § 5.1
Datadump § 5.2
Expression Pedals § 5.3
General Volume § 5.4
Keyboard Config § 5.5
Key Volumes § 5.6
MIDI Config § 5.7
Orchestrals § 5.8
Reset Procedures § 5.9
Reverb Settings § 5.10
Startup Settings § 5.11
Temperaments § 5.12
Tremulant Vox Humana § 5.13
Tuning § 5.14
Version § 5.15
Zimbelstern § 5.16
5.1 Crescendo
The crescendo pedal contains 20 pre-programmed registrations. These registrations start with
very quiet (pianissimo) to very loud (tutti). These pre-programmed registrations can be
changed.
1. Press the MENU-piston.
2. Use the - and + pistons to select the
Crescendo
function on the display.
3. Press the SET piston. The first step of the crescendo pedal appears on the
display.
4. Use the - and + pistons to select the step which has to be changed.
5. Change the registration and press the SET piston to save the new registration
in the memory of the organ.
6. Repeat steps 5 and 4 if more crescendo pedal steps has to be changed.
7. Press the MENU piston 2x to exit the Johannus Menu.
5.2 Datadump
The Datadump function sends several settings from the organ to a storage medium (the
Johannus Se, for example) through the MIDI SEQ output. See § 3.3 External
connections.